Residential & Commercial Roofing in Sullivan
Everything we do is roofing. That focus means our Sullivan crews install more roofs per year than companies that try to do siding, windows, and remodeling on the side.
Roof Replacement
Your roof replacement includes a full-system install: ice and water shield at eaves, valleys, and penetrations; synthetic underlayment across the entire deck; aluminum drip edge at rake and eave; starter strip with sealant; architectural shingles with 130+ mph wind rating; and continuous ridge vent for proper attic ventilation. We also install new pipe boots and vent flashing on every penetration.
Get a Free Quote →Roof Repair
Emergency roof repairs in Sullivan within 24 hours for active leaks. We tarp the area to stop immediate water entry, then schedule the permanent fix. Weekend and holiday emergency service available. Call (877) 349-1553.
Get a Free Quote →Storm Damage Repair
Wind damage and hail damage look different and require different documentation. Our HAAG-trained inspectors know what adjusters look for: granule displacement patterns, fractures in the shingle mat, seal failures, cracked ridge caps. Proper documentation is why our claims get approved.
Get a Free Quote →New Roof Installation
New construction underlayment per IRC R905 and ASTM D226 (felt) or ASTM D6757 (synthetic). Ice barrier per ASTM D1970 required at eaves in climate zones with average January temperature below 25°F. We install ice and water shield regardless. It's cheap insurance against ice dams and wind-driven rain. Drip edge per IRC R905.2.8.5 on eave and rake edges. Proper starter strip with factory sealant for wind resistance from day one.
Get a Free Quote →Metal Roofing
Standing seam metal is the longest-lasting residential roofing material you can install. 40-60 year lifespan, virtually zero maintenance, and it sheds hail and debris better than any shingle. Our Sullivan metal crews install residential and commercial standing seam, corrugated, and metal shingle profiles.
Get a Free Quote →Shingle Roofing
The difference between a cheap shingle roof and a quality one comes down to the system underneath. Shingles are only the outer layer. Ice and water shield in the valleys, synthetic underlayment across the deck, proper starter strip with factory adhesive, correct nailing pattern. That's what makes a shingle roof last in Illinois's weather.
Get a Free Quote →Flat Roofing
Flat roof leak detection in Sullivan: we start with a visual inspection of seams, flashings, and penetrations. If the leak source isn't obvious, we use electronic leak detection (ELD) or flood testing on membrane roofs. We find it and fix it. No guessing, no unnecessary tear-offs.
Get a Free Quote →Commercial Roofing
We install Carlisle SynTec and Firestone TPO membrane systems in 60-mil and 80-mil thickness over minimum R-25 polyiso insulation (more in climate zones requiring it). Seams hot-air welded at 900°F+ and tested with a seam probe. Fully adhered systems for wind uplift zones per FM I-90 or I-120. Mechanically attached for re-roofs over existing insulation. NRCA member, trained per manufacturer specifications.
Get a Free Quote →Gutter Installation
We hang gutters with hidden hangers screwed into the rafter tails or fascia board every 24 inches max. No spike-and-ferrule, no exposed hardware. Proper pitch is 1/4" per 10 feet toward each downspout. Too flat and water sits. Too steep and it looks wrong.
Get a Free Quote →Roof Inspection
Commercial and flat roof inspections include infrared moisture scanning with Flir E8 thermal cameras. Trapped moisture in the insulation layer shows as temperature differentials on the thermal image. No need to cut core samples everywhere. We identify wet zones, then core sample the suspect areas to confirm. This approach gives you a precise repair scope at a fraction of the cost of exploratory tear-offs.
Get a Free Quote →Emergency Roof Repair
Emergency tarping is step one. Stop the water. We secure heavy-duty poly tarps over the damaged area using 2x4 nailer boards attached to the deck. Once the immediate threat is contained, we schedule the permanent repair within 48-72 hours.
Get a Free Quote →Skylight Installation
VELUX FS (fixed) and VS (vented) skylights installed with EDL flashing kits for shingle roofs. The multi-step flashing integrates with the surrounding shingle courses per IRC R903.2. We frame the curb with doubled 2x8 or 2x10 lumber (depending on rafter depth), install ice and water shield membrane around the entire curb perimeter, then set the skylight with factory sealant before weaving step flashing into the field. Top headwall flashing tucks under the upslope shingle course. Bottom sill pan diverts water onto the downslope shingles. Zero exposed sealant joints. Mechanical flashing only.
Get a Free Quote →